United Kingdom

United Kingdom

Construction
Transport
Construction
Transport

Samples basket

AltroClean 44 technical data sheet

 

Part No. FC445L/FC441L

 

Last edited: February 2015

 

Keep out of reach of children. Avoid contact with skin and eyes.

AltroClean 44 is specially formulated to clean Altro safety flooring in kitchens and other areas where removal of grease and cleanliness of floors is essential. It can also be used for removing old or worn coatings of seals / polishes from Altro rubber flooring and Altro smooth vinyl flooring.

Method of use

  1. Sweep the floor.
  2. Add AltroClean 44 to clean, warm water; the dilution rate depends upon the degree of soiling (see below).
  3. Apply with suitable equipment such as a deck scrubber or similar, preferably a machine fitted with medium or heavy duty pads (brushes for Altro Marine 20) and leave for several minutes for the cleaner to attack the surface soil.
  4. Rinse the floor with clean water and dry after use.

Dilution rate

Regular maintenance: use 1 part AltroClean 44 to 40 parts clean, warm water. For heavily soiled floors: use 1 part AltroClean 44 to 10 parts clean, warm water. To remove emulsion based seals: use 1 part AltroClean 44 to 5-10 parts clean, warm water, depending on the seal used.

General

Full maintenance details for the range of Altro floors are available from Altro.

Health and safety precautions

Keep containers closed and away from children. This is an alkaline cleaner. As with all alkaline cleaners prolonged skin contact should be avoided. Wear rubber gloves.

First aid

Skin: The affected area should be irrigated with water and washed with soap.

Eyes: In case of contact with eyes irrigate with copious amounts of water. Seek medical attention.

Ingestion: Do not induce vomiting. Give drinks of milk or water and seek medical attention immediately.

Spillages

Flush thoroughly with water.
Available in 1 litre and 5 litres.

 

For further information or technical advice
call our Customer Care Centre on 01426 489516
or email: enquiries@altro.com

NOTE: “Altro Ltd” (“Altro”) endeavours to ensure that advice and information given in Product Data Sheets, Method Statements and Material Safety Data Sheets (all known as Product Literature) is accurate and correct. However, where Altro has no control over the selection of its products for particular applications, it is important that any prospective customer, user or specifier, satisfies him / herself that the product is suitable for the intended application. In this process, due regard should be taken of the nature and composition of the background / base and the ambient conditions both at the time of laying / applying / installing / curing of the material and when the completed work is to be brought into use.

However, as site conditions and the execution of the work are beyond our control, we accept no resultant liability.

Altro’s policy is one of continuous research and development and we reserve the right to update our products and information at any time without prior notice.