Samples request

  • Sample basket
  • Change country

    Select a country

  • Search the site

    Search the site

AltroGloss 211 data sheet

AltroGloss 211™ 

Altro floor finish 

 

Part No. AG2111L/AG2115L

February 2015

General

AltroGloss 211 is a metallised emulsion which provides a wear and protection layer on Altro smooth vinyl and Altro rubber floorings. The application of AltroGloss can aid the maintenance of the flooring but it should be noted that this will reduce the slip resistance. It is the responsibility of the owner / operator to assess the appropriate level of slip resistance which is required.

Method of use

  1. Clean the floor with AltroClean44™ or 44+™ ensuring that the floor is rinsed clean and dry.
  2. Apply a thin and even coat of AltroGloss 211 with a clean damp cloth or applicator. Do not rub.
  3. Allow approximately 20 minutes for the first coat to dry.
  4. Apply a second coat and leave overnight to dry.

Maintenance

Remove any marks with a clean damp cloth, or wash using a neutral cleaner / maintainer. Dry buffing with soft pads or a soft clean broom can enhance the appearance.

Renewal

Further coats of AltroGloss 211 can be applied on top of the two original coats, if and when necessary, but the floor must be clean and dry. If after a time your floor begins to show signs of a build up of polish or is impregnated with dirt, strip and remove the dressing using AltroClean 44 or 44+ prior to resealing.

Coverage

Up to 60m² per litre.
Available in 1 litre and 5 litres.




For further information or technical advice
call our Customer Care Centre on 01426 489516
or email: enquiries@altro.com

NOTE: “Altro Ltd” (“Altro”) endeavours to ensure that advice and information given in Product Data Sheets, Method Statements and Material Safety Data Sheets (all known as Product Literature) is accurate and correct. However, where Altro has no control over the selection of its products for particular applications, it is important that any prospective customer, user or specifier, satisfies him / herself that the product is suitable for the intended application. In this process, due regard should be taken of the nature and composition of the background / base and the ambient conditions both at the time of laying / applying / installing / curing of the material and when the completed work is to be brought into use.

However, as site conditions and the execution of the work are beyond our control, we accept no resultant liability.

Altro’s policy is one of continuous research and development and we reserve the right to update our products and information at any time without prior notice.